Rebuilding a Volkswagen 2.0 diesel DPF and retaining the original catalyst
This Volkswagen diesel measured over 5 million particles/cm³ in our workshop. We rebuilt the DPF, kept the original catalyst and retested the exhaust.
A Volkswagen with a 2.0-litre diesel engine came to us after it failed its Latvian roadworthiness inspection. The CSDD test had recorded about 2 million particles/cm³ in the exhaust. When we repeated the test in our workshop, the count exceeded 5 million particles/cm³. After a diagnostic scan, we removed the diesel particulate filter (DPF) to inspect its outlet and the point where exhaust gas enters the low-pressure EGR circuit.
What we found at the DPF outlet
The strainer in the low-pressure exhaust gas recirculation (EGR) circuit was clogged. Soot, ash and thick, oily deposits had collected around it. We left the assembly overnight and black liquid was still dripping from it the next morning. During removal we also found a badly corroded exhaust clamp and a split flex pipe. We showed both parts to the owner and agreed to replace them.
Rebuilding the filter and checking the exhaust
We sent the DPF out for a rebuild. The original catalytic converter was retained and a new silicon carbide (SiC) filter element was fitted inside the existing housing. Once the assembly came back, we refitted it to the car.
With the particle counter probe in the tailpipe, we ran a continuous test to track the reading over time. The count fluctuated between 8,000 and 10,000 particles/cm³, then dropped to around 1,500 particles/cm³.
Video related to this case
Watch the video for additional details about this job.
