Audi A4 2.0 TDI — Stage 1 tuning and 4WD dyno results
AUTOCHIP.LV / TECHNICAL CASE

Audi A4 2.0 TDI — Stage 1 tuning and 4WD dyno results

We tuned the Bosch EDC17CP14 ECU on an Audi A4 2.0 TDI and tested it on our 4WD dyno in Riga. Torque rose from 326 Nm to just under 390 Nm after Stage 1.

Stage 1 ECU programming Dyno testing DPF
Date 20.11.2026
Vehicle Audi A4
Engine 2.0 TDI
ECU Bosch EDC17CP14

The owner brought this Audi A4 2.0 TDI to us for a Stage 1 tune. During our initial checks, we found that the diesel particulate filter (DPF) was completely blocked, causing high exhaust backpressure. With the owner’s agreement, we removed the filter and left the catalytic converter in place.

Power and torque before tuning

This A4 was the first car we tested on our new 4WD dyno in Riga. Audi rated this version of the 2.0 TDI at 143 PS and 320 Nm. We made the baseline run with the DPF already removed and the factory power calibration still in place. The car produced 141 PS and 326 Nm.

Stage 1 dyno results

We prepared a custom Stage 1 calibration for this Audi’s Bosch EDC17CP14 engine control unit. After loading the calibration, we ran the car on the same dyno again. It produced about 165 PS and just under 390 Nm of torque.

Video related to this case

Watch the video for additional details about this job.