This 2005 Opel Vectra with a 1.9 CDTI engine and EDC16C9 control unit came in for software adjustment and a power increase. The DPF had already been physically removed, but the ECU software had not yet been adapted to that configuration.

Before the ECU was remapped, the dyno recorded approximately 176.8 hp and 359 Nm. The video lists standard figures of 150 hp and 350 Nm.

After calibration, the result was 191 hp and 468.3 Nm. The video therefore shows the car's output with its existing software after the hardware change, followed by the measurement after ECU remapping.