Volvo Trucks FH ( 2nd) 440 12.8L
ECU Chiptuning Performance Results
Estimated power and torque gains after Stage 1 ECU remapping
Torque Nm
Estimated Stage 1 gains are calculated from stock values using an approximate 20% increase. Actual performance improvements may vary depending on vehicle condition, fuel quality, hardware configuration and operating environment.
Chip tuning for the Volvo Truck FH (2nd) 440 12.8L involves recalibrating the engine’s electronic control unit (ECU), specifically the TRW EM2.2 Gen2 with an MPC5554 processor, to improve efficiency and longevity. For trucks operating in demanding conditions, key objectives are fuel consumption reduction and ensuring stable engine performance under load. Reprogramming the ECU enables more precise operation of the fuel and injection systems, positively impacting the fuel economy of the Volvo FH (2nd) 440 12.8L.
We analyze data from sensors and adjust fuel and ignition maps to achieve optimal performance from the 12.8-liter engine, which develops 324 kW of power and 2200 Nm of torque. In addition to optimizing fuel consumption, chip tuning allows the removal of errors and restrictions imposed by the manufacturer, and, if necessary, the deactivation of the AdBlue, DPF, and EGR systems. This is particularly relevant for trucks operated in dusty environments or with poor-quality fuel.
It is important to note that such modifications must comply with environmental regulations in the region of operation. At AutoChip.lv, we pay particular attention to engine reliability and lifespan. ECU reprogramming is performed using modern equipment and proven algorithms, guaranteeing stable operation of the Volvo Truck FH (2nd) 440 12.8L throughout its service life. Chip tuning for the Volvo Truck FH (2nd) 440 12.8L is an investment in the durability and economy of your vehicle.
Our work with Volvo
▶
Volvo Denso Evo — AdBlue and NOx software work
Volvo with a Denso Evo ECU: control unit reading, software changes and a post-drive check.
▶
Volvo with a Denso ECU — programming now available in Riga
AutoChip announces Denso ECU reading and programming for Volvo vehicles equipped with AdBlue.
▶
Volvo 1.6 D — smoke and uneven running after a previous remap
Volvo 1.6 D with an EDC16C34 ECU: review of the existing calibration, smoke diagnostics and engine data analysis.
▶
Two Volvo cars with Denso ECUs: why do their DPF problems need different solutions?
Two Volvo cars with similar engines have different DPF problems. Find out why engine condition should be checked before replacing the filter.
Specification
| Power (KW) | 324 |
|---|---|
| Power (HP) | 443 |
| Torque (Nm) | 2200 |
| Power (PS) | 441 |
| ECU Brand | TRW |
| ECU Version | EMS2.2 Gen2 |
| ECU Micro | MPC5554 |
| Tools | KESS3 compatible Powergate not compatible |
| Connection | OBD not available |
| Year | 2012 |
| Type | Trucks |
